Tips on how to solve multiple paper recharging problem in HP5L as well as HP6L laser printer.

As well as encountered before the problem having to deal with multiple paper loading into your HP LaserJet 5L together with 6L? Do you know that this is caused by defective separation pad where it's rubber has worn-out. The function of separation pad may be to control or allow paper to pass through it, one at a time full.
If it spoilt, few sheets of paper are going to be pulled instead of one should you send a printer command. This sometimes will made the papers to jammed up. For the most extreme case, it will hurt your heating/fuser sleeve. The cost of a heating element is high-priced than a separation protect. There is one temporary way which you can use to solve the problem stated without choosing a new oven new separation pad. The task of removing and altering the separation pad can be easy and fast. To start with, remove the rubber pad belonging to the holder. Be careful if you are removing because you mighttorn all the rubber into pieces. Second, clean the holder in order to avoid any dirt or glue sticking with it. After that, apply hardly any super glue that is actually enough to cover the surface of the rubber pad. Finally, reversed the rubber pad and stick it back to the brochure holder. Please ensure that the area should face upward prior to when you stick the rubber topper. It will work as well as a new one.
Observe: If you are servicing the printer for use on your customer, I'll recommend that you replace a new one to them unless you抮e maintaining and servicing your current laser printer.

Article Tickets:
Laser Printer